London

Tech

These extra bits are cool these extra bits the curve they're just fancy unless I can find a curved timber which I'm going so that'll be the main part of the bracelets doing all the work and the curves will be extra these will be you know across the grain so they'll be short grain answer there's no strength in that really and this piece isn't pressing against anything and stiffening the brace...

0 Events - 1 Members - London
Outdoors & Adventure

While i'm at it i'll finish installing the remaining casters hole i drilled through the plywood i'll plug it with this t-nut and finally i'll add the last screw to hold the casters it's pretty safe to say this handle is a decorative handle it works for pulling the box but it's not strong enough to lift the entire box instead of overhanging the lid or adding a handle to it i decided to cut out...

0 Events - 1 Members - London
Tech

What we call a self tamping tip the self tapping tip means that you don't have to drill a pilot hole just drive the screw and it creates its own hole without splitting the wood try that with an ordinary screw and the results are usually much different you also notice that a  screw doesn't have threads along its entire length like an ordinary screw does as you drive the Metal Corner Brackets...

0 Events - 1 Members - London
Tech

If you get pinned between a fence and it but if you start it here and you want to walk it up to the thing put it in forwards and you just don't want to push the trigger you don't want to do this okay that's not good for it so Metal Corner Brackets if you're gonna do it it's let's say it's off a little bit count to five once it's all stunned done moving put it in forwards and give it a little...

0 Events - 1 Members - London
Tech

The need to use nails glues or even panel pins and there's got the other benefit that you can if you need to remove the screw without damaging the wood which also you can't do with panel pins or pins that you're firing out of now go now the other really good thing about the screw it's got a tri lock system which guessing is referring to these three different screw threads here one two three...

0 Events - 1 Members - London
Tech

It does fit pretty close, but you can see when you twist it, there's a little slop in there. And that means it's not the perfect fit. This is called a pozidriv screw. And it's actually got a little bit of a different head and you can see it's got these little slots here that are tapered in, in between the plus. And when you put this one in, it is a perfect fit. Metal Corner Brackets So this...

0 Events - 1 Members - London
Family

I might going to mount it to that block that's down on the edge of the anvil here and this is the last steak that I got out to show you again it doesn't really fit in the hardy hole this one could drop all the way into a swedge block though and be used in a oversized hole and it's just not a nice big top around which probably is more useful than a lot of these are now there are other types of...

0 Events - 1 Members - London
Tech

I think it's pretty heavy-duty and this is an ml to 4 Z so it's I think it's three inches or three and a half inches wide it might be four inches wide and you're supposed to use a different type of screw you use a strong tie screw but they're thicker than the ones I just showed you and I think it says right on here Metal Corner Brackets use a quarter inch by inch and a half Corner Brackets so...

0 Events - 1 Members - London
Tech

Make your work efficient with de mite clamp a powerful clamp that ensures your Metal Corner Brackets project always stays locked in place it can deliver over five thousands of clamp load effortlessly so that you can stop wasting time slowly tied in clamps this clamp is also compatible with impact wrenches rated up to 400 feet pounds it comes with a copper coating which protects the clamp screw...

0 Events - 1 Members - London